Program-A-Bead®
3
|
 |
A
Servo motor driven 1 component positive rod displacement meter
system for dispensing precise beads of medium to high viscosity
mastic materials.
Designed for high speed robotic and automation
production applications, requiring robot interface, variable
flow rates, precision beads, low maintenance and long life.
Many rod sizes and dispense valves are available to meet the
exact application requirements.
|
|
|
 |
Click
here for further information on the Program-A-Bead 3 |
|
Top of
Page
|
Servo-Flo™ 305
|
|
 |
The
Servo-Flo 305 system is a mid-sized shot meter ideal for robotic
and automated dispensing applications such as
bonding, gasketing, filling and sealing operations.
The Servo-Flo 305 can be floor, pedestal or robotic mounted for
automation or manual applications.
System design selections include meter volume size, material
temperature control, operator interface, dispense valve,
material supply and system integration.
|
|
|
|
Click
here for further information on the Servo-Flo 305 |
|
Top of
Page
|
|
Micro-Meter 1 Series - Servo-Shot®
1 / Servo-Bead® 1 /
Servo-Flo™ 401
|
|
 |
These
Micro-Meter 1 series positive rod displacement meters dispenses
single and multiple beads (Servo-Bead) or specific shot sizes
(Servo-Shot). The Servo-Shot Micro-Meters dispense precision
volumes of 1 component materials in the range of 0.01 cc’s up to
3.6 cc’s.
The Servo-Flo 401 meter dispenses precision volumes of 1
component materials in the range of 1 cc up to 8.5 cc’s.
The servo drive design allows the flow rate to be adjusted
during the dispense cycle to ensure the bead profile or shot
volume meets the application requirement.
The dispense valve can be meter outlet mounted or remote mounted
for flexible location requirements.
|
|
|
|
Click
here for further information on the Micro-Meter 1 Series |
|
|
|
Click
here for further information on the Servo-Flo 401 |
|
Top of
Page
|
|
Servo-Flo™ Gear Meter
|
|
 |
The
Servo-Flo Gear Meter is a servo motor driven pump specifically
designed for precision metering of medium to high viscosity
materials.
This meter is typically used for dispensing 1 Component
silicones and urethanes for gasketing applications.
The Servo-Flo Gear Meters do not require reloading at the end of
the dispense cycle and allow the flow rate to adjust during
dispense and from part to part.
The Gear Meter is also available in a High Volume (HV) format.
This meter can be combined with a second gear meter for
2 Component meter-mix and dispense.
|
|
|
|
Click
here for further information on the Servo-Flo Gear Meter |
|
|
|
Click
here for further information on the Servo-Flo Gear Meter HV |
|
Top of
Page
|
|
Microshot™
1
|
|
 |
Dispenses 0.01 - 2.00 cc precise volumetric shots of 1 component
materials.
Air powered or Servo powered, rod displacement meter package for
low or medium viscosity materials.
The meter can be supplied via cartridges, pressure tanks or
supply pumps.
|
|
|
|
Click
here for further information on the Micro-Shot 1 |
|
Top of
Page
|
|
See-Bead®
|
|
 |
This
1 component rod displacement metering system
dispenses precise beads of low, medium or high viscosity
materials.
Powered by an Air-Draulic™ air-oil cylinder or Electric
servo-motor drive system to provide pre-set consistent flow
rates (air-oil) or variable flow rates (servo) for bead or spray
applications.
The positive rod displacement metering unit is sized to your
specific application requirement and available in sizes from
small shots down to 1 cc and large volume shots up to 235 cc or
larger.
|
|
|
|
Click
here for further information on the See-Bead |
|
Top of
Page
|
|
Shot-A-Matic®
|
|
 |
This
1 component rod displacement shot meter system dispenses precise
shot volumes of low, medium or high viscosity materials. The
meter uses adjustable position hard stop shot controls and clean
cut-off dispense valves to dispense the exact volume.
The dispensed volume, from 1 cc through several hundred cc’s, is
adjusted manually and is powered by an air cylinder. The meter
can be supplied by pressure tanks or pumps.
The controls allow integration with automation for precision
volumes of material dispensed on demand.
Various shot meter sizes available to meet your application
requirements.
|
|
|
|
Click
here for further information on the Shot-A-Matic |
|
Top of
Page
|
|
Servo-Flo™
404
|
|
 |
Compact design combines shot metering and dispensing into one
assembly. Dispenses precise beads of 1 component low to high
viscosity materials with variable flow rate control.
Servo motor powered, single-acting positive displacement meter
assembly has a quick-change dispense valve. Select from a
variety of dispensing styles.
Designed for mounting to a robot wrist, pedestal arm or moveable
automation.
|
|
|
|
Click
here for further information on the Servo-Flo 404 |
|
Top of
Page
|
|
ISD -
Integrated Servo Dispenser
|
|
 |
The
ISD meter is double-acting for continuous flow of 1 component
medium to high viscosity materials. This system is ideal for
sealer dispensing applications requiring high volumes dispensed
quickly without reloading.
ISD systems typically use 2 ball or chop-check high volume
pumps. Select a dispensing valve from a wide selection including
Servo-Ribbon Applicator, Multi-Stream Applicator, Slotted Nozzle
Applicator, Snuf-Bak, Tip-Seal and No-Drip for extruding,
streaming and spraying materials.
Meter options include waterborne/abrasive material design,
DeviceNet and material temperature control.
|
|
|
|
Click
here for further information on the ISD |
|
Top of
Page
|
|
IPD -
Integrated Pneumatic Dispenser
|
|
 |
This high volume, air powered, positive rod displacement meter
system dispenses an accurate fluid pressure of medium to high
viscosity 1 component materials.
The IPD meter is ideal for spray applications requiring large
volumes of material applied quickly at specific pressure. The
Dual IPD system provides uninterrupted continuous flow for any
volume required.
Meter options include waterborne/abrasive material design,
DeviceNet and material temperature control. Select from a
variety of dispense valves.
|
|
|
|
Click
here for further information on the IPD |
|
Top of
Page
|
|
IPS -
Integrated Pneumatic System
|
|
 |
This
high volume, air powered, positive rod displacement meter system
dispenses an accurate flow rate of medium to high viscosity 1
component materials such as mastics, deadeners and reinforcement
materials.
The IPS meter is ideal for applications requiring large volumes
of material applied quickly at a specific flow rate for volume
control. The Dual IPS system provides uninterrupted continuous
flow for any volume required.
Meter options include waterborne/abrasive material design,
DeviceNet and material temperature control. Select from a
variety of dispense valves.
|
|
|
|
Click
here for further information on the IPS |
|
Top of
Page
|
|
Servo-Flo™ 502
|
|
 |
The
Servo-Flo 502 is a positive-displacement, 1 component,
single-acting shot meter designed to produce a controlled flow
of 1 component materials.
Each meter is appropriately sized to provide the capacity
requirements of individual applications, within the constraints
of the design.
The Servo-Flo 502 is supplied by high volume pumps and precisely
meters the material to the selected dispense valve.
|
|
|
|
Click
here for further information on the Servo-Flo 502 |
|
Top of
Page
|
|
|
"When it comes to solving
liquid dispensing problems, you won't find
a better resource than Sealant Equipment and Engineering." |
|
|
|
 |
